Black & Decker KD970, Руководство пользователя

Страница: 6 / 60

6
ENGLISH
Hammer drilling
◆
For hammer drilling in masonry and concrete, set the
operating mode selector (5) to the
position
◆
When hammering, the tool should not bounce and run
smoothly. If necessary, increase the speed.
Chiselling
◆
For chiselling with spindle lock and for light chipping, set
the operating mode selector (5) to the position.
◆
Make sure the forward/reverse switch is in the forward
position.
◆
When changing from hammer drilling to chiselling,
turn the chisel to the desired position. If resistance is felt
during mode change, slightly turn the chisel to engage the
spindle lock.
Selecting the direction of rotation
For drilling, for tightening screws and for chiselling, use
forward (clockwise) rotation. For loosening screws or removing
a jammed drill bit, use reverse (counterclockwise) rotation.
◆
To select forward rotation, push the forward/reverse
slider (3) to the left.
◆
To select reverse rotation, push the forward/reverse slider
to the right.
Warning! Never change the direction of rotation while the
motor is running.
Setting the drilling depth (fig. G)
◆
Slacken the side handle (6).
◆
Set the depth stop (7) to the desired position. The maximum
drilling depth is equal to the distance between the tip of
the drill bit and the front end of the depth stop.
◆
Tighten the side handle (6).
Switching on and off
◆
To switch the tool on, press the variable speed switch (1).
The tool speed depends on how far you press the switch.
◆
For continuous operation, press the lock-on button (2) and
release the variable speed switch. This option is available
only in forward (clockwise) rotation.
◆
To switch the tool off, release the variable speed switch.
To switch the tool off when in continuous operation,
press the variable speed switch once more and release it.
Accessories
The performance of your tool depends on the accessory used.
Black & Decker and Piranha accessories are engineered to
high quality standards and designed to enhance the performance
of your tool. By using these accessories you will get the very
best from your tool.
Maintenance
Your tool has been designed to operate over a long period of
time with a minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and regular cleaning.
◆
Regularly clean the ventilation slots with a clean,
dry paint brush.
◆
To clean the tool, use only mild soap and a damp cloth.
Never let any liquid get inside the tool and never immerse
any part of the tool into liquid.
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
◆
Safely dispose of the old plug.
◆
Connect the brown lead to the live terminal in the new plug.
◆
Connect the blue lead to the neutral terminal.
Warning! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality
plugs. Recommended fuse: 5 A.
Protecting the environment
Black & Decker provides a facility for recycling
Black & Decker products once they have reached the
end of their working life. This service is provided
free of charge. To take advantage of this service
please return your product to any authorised repair
agent who will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at the
address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of our
after-sales service and contacts are available on the Internet
at:
www.2helpU.com
Technical data
KD970 KD980
Voltage V
AC
230 230
Power input W 600 650
No-load speed min
-1
0 - 1,000 0 - 1,000
Load speed min
-1
0 - 820 0- 820
Impact rate min
-1
0- 4,000 0- 4,000
Impact energy J 2.0 2.2
Tool holder SDS-plus
®
SDS-plus
®
Max. drilling capacity
Concrete mm 22 24
Steel mm 13 13
Wood mm 30 30
Core drilling capacity in soft brick mm - 65
Chiselling no yes
Weight kg 2.3 2.3