Black & Decker KA2000, Оригинальное руководство пользователя

Страница: 7 / 72

7
ENGLISH
(Original instructions)
Labels on tool
The following pictograms are shown on the
tool:
Warning!
To reduce the risk of injury,
the user must read the instruction
manual.
Electrical safety
This tool is double insulated;
therefore no earth wire is required.
Always check that the power supply
corresponds to the voltage on the
rating plate.
• If the supply cord is damaged, it must be
replaced by the manufacturer or an
authorised BLACK+DECKER Service
Centre in order to avoid a hazard.
Using an extension cable
• Always use an approved extension cable
suitable for the power input of this tool
(see technical data). Before use, inspect
the extension cable for signs of damage,
wear and ageing. Replace the extension
cable if damaged or defective. When
using a cable reel, always unwind the
cable completely. Use of an extension
cable not suitable for the power input of
the tool or which is damaged or
defective may result in a risk of fire and
electric shock.
Features
This tool includes some or all of the
following features.
1. On/off switch
2. Dust collection canister
3. Sanding base
4. Finger attachment
Accessories
The accessories supplied with your sander
depend upon the model that you have
purchased. All the accessories listed below
are available in our Piranha® range. If you
require an accessory that is listed below but
is not supplied with your sander please visit
our website at www.blackanddecker.eu.
The performance of your tool depends on
the accessory used. BLACK+DECKER and
Piranha accessories are engineered to high
quality standards and designed to enhance
the performance of your tool. By using these
accessories you will get the very best from
your tool.
Detail finger.
For small hard-to-reach areas.
The detail finger can be used for
light sanding and for sanding
into corners.
(Part Number - X32214-XJ)
240 grit sanding mesh.
For a fine finish for large detail
sanding.
(Part Number - X39132-XJ)
120 grit sanding mesh.
For a medium finish for large
detail sanding.
(Part Number - X39127-XJ)
80 grit sanding mesh.
For a coarse finish for large
detail sanding.
(Part Number - X39122-XJ)
240 grit large detail sanding
sheet with two replacement
tips.
For a fine finish for large detail
sanding.
(Part Number - X31019-XJ)
120 grit large detail sanding
sheet with two replacement
tips.
For a medium finish for large
detail sanding.
(Part Number - X31009-XJ)
60 grit large detail sanding
sheet with two replacement
tips.
For a coarse finish for large
detail sanding.
(Part Number - X31039-XJ)
Item Description