![background image](http://html.mh-extra.com/html/black-and-decker/gwc1820pc/gwc1820pc_manual_32101008.webp)
8
ENGLISH
Labels on appliance
The following warning symbols are found on the appliance
along with the date code:
Read the manual prior to operation.
Wear safety glasses or goggles when
operating this appliance.
N
Wear suitable ear protectors when operating
this appliance.
Always remove the battery from the
appliance before performing any cleaning or
maintenance .
K
Beware of flying objects. Keep bystanders
away from the cutting area.
R
Do not expose the appliance to rain or high
humidity.
Features
This appliance includes some or all of the following features.
1. On / Off Switch
2. Tube
3. Power command button.
Tube assembly
Note: Ensure the sweeper is switched off and the battery is
removed before attaching or removing the sweeper tube. The
tube must be assembled to the housing before use.
u
To attach the tube to the sweeper, line up the tube with the
sweeper housing as shown in Figure A.
u
Push the tube into the sweeper housing until the lock
button (4) engages the lock hole (5) in the tube.
To install battery pack
u
Insert battery pack into tool until an audible click is heard
as shown in Figure B. Make sure battery pack is fully
seated and fully latched into position.
To remove battery pack
u
Depress the battery release button (6) in the back of the
battery pack and pull battery pack out of tool assembly as
shown in Figure C.
Operation
Warning! Always wear safety glasses. Wear a filter mask
if the operation is dusty. Use of gloves, long pants and
substantial footwear is recommended. Keep long hair and
loose clothing away from openings and moving parts. THIS
SWEEPER IS FOR HOUSEHOLD USE ONLY.
u
Hold the sweeper with one hand as shown in Figure
D and sweep from side to side with the nozzle several
inches above the ground. Slowly advance keeping the
accumulated pile of debris in front of you.
Switching on and off
Warning! Use both hands to grip the product firmly when
switching on.
Warning! Do not point unit discharge at self or bystanders.
u
To switch the sweeper on, slide the on/off switch forward
as shown in Figure E.
u
To switch the sweeper off, slide the on/off switch back as
shown in Figure F.
POWERCOMMAND feature
The POWERCOMMAND feature (3) is located on the
GWC1820PC tool handle as shown in Figure G. It allows you
to optimise the tools performance and boost the power as
needed.
u
Switch the blower on.
u
To activate the “Boost” mode, press and hold the
POWERCOMMAND button down.
u
To deactivate the “Boost” mode, release the
POWERCOMMAND button.
u
Operate in “Normal” mode for most sweeping needs.
(Longer runtime will be achieved.)
u
Activate “Boost” mode as needed to clear heavy or wet
debris.
Troubleshooting
Problem
Possible cause
Possible solution
Unit will not start.
Battery not installed
properly.
Check battery
installation.
Battery not charged.
Check battery charging
requirements.
Battery will not charge.
Battery not inserted into
charger.
Insert battery into
charger until green LED
appears.
Charger not plugged in.
Plug charger into a
working outlet. Refer to
“Important Charging
Notes” for more details.
Check current at
receptacle by plugging
in a lamp or other
appliance.
Check to see if
receptacle is connected
to a light switch which
turns power off when
you turn out the lights.
Содержание GWC1820PC
