Black & Decker GT100, Оригинальное руководство пользователя

Страница: 6 / 76

6
ENGLISH
♦ Always ensure that all guards are fi tted
when using the tool. Never attempt to use an
incomplete tool or a tool with unauthorised
modi
fi cations.
♦ Never allow children to use the tool.
♦ Be aware of falling debris when cutting the
higher slides of a hedge.
♦ Always hold the tool with both hands and by
the handles provided.
Safety of others
♦ This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety.
♦ Children should be supervised to ensure that
they do not play with the appliance.
Vibration
The declared vibration emission values stated in
the technical data and the declaration of conformity
have been measured in accordance with
a standard test method provided by EN 60745 and
may be used for comparing one tool with another.
The declared vibration emission value may also be
used in a preliminary assessment of exposure.
Warning! The vibration emission value during
actual use of the power tool can differ from the
declared value depending on the ways in which
the tool is used. The vibration level may increase
above the level stated.
When assessing vibration exposure to determine
safety measures required by 2002/44/EC to
protect persons regularly using power tools in
employment, an estimation of vibration exposure
should consider, the actual conditions of use and
the way the tool is used, including taking account
of all parts of the operating cycle such as the times
when the tool is switched off and when it is running
idle in addition to the trigger time.
Labels on tool
The following pictograms are shown on the tool:
Warning! To reduce the risk of injury, the
user must read the instruction manual.
Always wear safety glasses and ear
protection.
Wear gloves when operating this tool.
Immediately disconnect the cable from the
mains if it is damaged or cut.
Do not expose the tool to rain or high
humidity.
Electrical safety
This tool is double insulated; therefore
no earth wire is required. Always check
that the power supply corresponds to the
voltage on the rating plate.
♦ If the supply cord is damaged, it must be
replaced by the manufacturer or an authorised
Black & Decker Service Centre in order to
avoid a hazard.
Using an extension cable
Always use an approved extension cable suitable for
the power input of this tool (see technical data). The
extension cable must be suitable for outdoor use and
marked accordingly. Up to 30 m of 1.5 mm² HO5V V-F
extension cable can be used without loss of product
performance. Before use, inspect the extension cable
for signs of damage, wear and ageing. Replace the
extension cable if damaged or defective. When using
a cable reel, always unwind the cable completely.
Features
This tool includes some or all of the following
features.
1. Trigger
switch
2. Front handle switch
3. Front
handle
4. Guard
5. Blade
6. Blade
sheath
7. Cable restraint
This hedgetrimmer has the following features for
your bene
fi t:
♦ Ergonomically formed handles for comfortable
cutting.
♦ Machined blades for improved cutting.
♦ Dual action blades for reduced vibration.
Assembly
Warning! Before assembly, make sure that the tool
is switched off and unplugged and that the blade
sheath is
fi tted over the blades.