Black & Decker GL4525-XE, Руководство пользователя

Страница: 7 / 14

7
ENGLISH
(Original instructions)
Additional safety instructions for grass trimmers
Warning! Cutting elements continue to rotate after the motor
is switched off.

Be familiar with the controls and the proper use of the
appliance.

Before use, check the power supply cord and extension
cord for signs of damage, ageing and wear. If a cord
becomes damaged during use, disconnect the cord from
the mains supply immediately. DO NOT TOUCH THE
CORD BEFORE DISCONNECTING THE SUPPLY.

Do not use the appliance if the cords are damaged or
worn.

Wear stout shoes or boots to protect your feet.

Wear long trousers to protect your legs.

Before using the appliance, check that your cutting path is
free from sticks, stones, wire and any other obstacles.

Only use the appliance in the upright position, with the
cutting line near the ground. Never switch the appliance
on in any other position.

Move slowly when using the appliance. Be aware that
freshly cut grass is damp and slippery.

Do not work on steep slopes. Work across the face of
slopes, not up and down.

Never cross gravel paths or roads while the appliance is
running.

Never touch the cutting line while the appliance is running.

Do not put the appliance down until the cutting line has
come to a complete standstill.

Use only the appropriate type of cutting line. Never use

Be careful not to touch the line trimming blade.

Take care to keep the mains cable away from the cutting
line. Always be aware of the position of the cable.

Keep hands and feet away from the cutting line at all
times, especially when switching on the motor.

Before using the appliance and after any impact, check for
signs of wear or damage and repair as necessary.

Never operate the appliance with damaged guards or
without guards in place.

always return the machine to its normal operating position
before switching on.

Always ensure that the ventilation slots are kept clear of
debris.

Do not use the lawn trimmer (edge trimmer), if the cords
are damaged or worn.

Keep extension cords away from cutting elements.
Read the manual prior to operation.
Wear safety glasses or goggles when operating
this appliance.
Wear suitable ear protectors when operating this
appliance.
Always remove the plug from the socket before
inspecting a damaged cable. Be careful not to
use your strimmer if the cable is damaged.
from the cutting area.
Do not expose the appliance to rain or high
humidity.
Electrical safety
This appliance is double insulated; therefore no
earth wire is required. Always check that the
power supply corresponds to the voltage on the
rating plate.
Labels on appliance
The following warning symbols are found on the appliance:

If the supply cord is damaged, it must be replaced by the
manufacturer or an authorised Black & Decker Service
Centre in order to avoid a hazard.

Electric safety can be further improved by using a
highsensitivity 30 mA Residual Current Device (RCD).
Features
This appliance includes some or all of the following features.
1. On/off switch
2. Handle
3. Cable restraint
4. Power inlet
5. Second handle
6. Guard
7. Spool housing
8. Head
9. Edge guide