Black & Decker FX1050, Оригинальное руководство пользователя

Страница: 4 / 20

4
ENGLISH
(Original instructions)
Additional safety instructions for food
processors
Warning! Do not place near a hot Gas or electric oven.
• Do not Immerse Food Processor, Cord or Plug in any
liquid.
• Allow all moving parts of the appliance to come to a stop
before approaching.
• Always use on a clean work surface and clean the
surface thoroughly after use.
• Allow the appliance to cool before storing.
• Keep hands, long hair and loose clothing away from the
beaters.
• Always take care when handling the sharp cutting
blades when emptying the bowl and during cleaning.
Electrical safety
Before use, check that the mains voltage corresponds to the
voltage on the rating plate.
This product must be earthed. Always check that
the power supply corresponds to the voltage on
the rating plate.
• Appliance plugs must match the outlet. Never modify the
plug in any way.
• Do not use any adapter plugs with earthed (Class 1)
appliances. Unmodified plugs and matching outlets will
reduce the risk of electric shock.
• To avoid the risk of electric shock, do not immerse the
cord, plug or appliance in water or other liquid.
• This appliance includes a safety switch which prevents
operation unless the accessories are securely installed.
• This appliance incorporates a protective device against
high temperatures. If the temperature becomes too high,
the unit will turn off automatically and will resume
operation when the motor has cooled sufficiently (after
about 15 minutes).
• Do not operate the appliance for more than a minute at
a stretch.
• If operation is not finished within 1 minute, turn off the
machine and let it cool for 10 minutes before the next
round of operation. If more than 5 rounds of operation
are required, cool the machine for 90 minutes to room
temperature before the next 5 rounds. This can lengthen
lifespan of the machine.
Extention cable & class 1 product
• A 3 core cable must be used as your appliance is
earthed and of class 1 construction.
• Up to 30m (100 ft) can be used without loss of power.
• If the supply cord is damaged , it must be replaced by
the manufacturer or an authorised BLACK+DECKER
Service Centre in order to avoid a hazard.
Features
1. Small pusher
2. Big pusher
3. Protection cover
4. Safety lock
5. Bowl cover
6. Disc holder
7. Drive shaft
8.
Processing bowl
9. Motor base
10. Speed switch
11. Spatula
12. Fine slicing disc
13. Coarse slicing disc
14. French fry cutting disc
15. Fine shredding disc
16. Coarse shredding disc
17. Chopping Blade
18. Filling cap
19. Blender cover
20. Blender jar
21. Dough blade (plastic)
22. Grinding cup
Assembly
Warning! Before performing any assembly or
maintenance, switch off and remove from power
supply.
Use
Warning! Let the appliance work at its own pace. Do not
overload.
• Place the appliance on a flat, steady surface.
• Ensure that the power cord is unplugged from the power
outlet and the speed selector is set to the "0" position.
Chopper assembly
• Position the driver (7) on the motor base (9).
• Position the processing bowl (8) onto the driver (7) and
turn clockwise to seat firmly on the motor base (9).
• Place the chopper (17) onto the driver (7).
• Place the bowl cover (5) onto the bowl (8), turn clockwise
until the cover locks on the bowl.
• Place the pushers (1) & (2) into feeding chute located on
the bowl cover.