Black & Decker FV1200, Руководство пользователя

Страница: 9 / 20

English
-9-
English
Cleaning the dust container and filters
(fig. F and G )
The filters are reusable and should be
cleaned regularly.
• Press the release latch (3) and open the
container door (2).
• Remove the filters (10 and 11).
• Empty the dust container.
• Brush any loose dust off the filters.
• Wash the filters in warm, soapy water
(fig. G).
Warning! Do not immerse the appliance in
water. A damp cloth and soapy water
should be used to clean the exterior of the
appliance. Always make sure that the
appliance is completely dry before re-use or
storing.
• Make sure that the filters (10 and 11) are
dry.
• Refit the filters (10 and 11).
• Close the container door (2). Make sure
that the release latch (3) clicks into
place.
Warning! Never use the appliance without
the filters.
Optimum dust collection will only be
achieved with clean filters.
Maintenance access (Fig. H and I)
The maintenance access panel (8) can be
removed to aid cleaning should the
appliance become blocked, resulting in a
loss of suction.
• Remove the maintenance access panel
(8) from the pivot arm (6) using a flat
blade screwdriver (fig. I) to release the
front clip features.
• Once released, the section will pivot free
of the main assembly to give access for
cleaning.
Replacing the filters
The filters should be replaced every 6 to 9
months and whenever worn or damaged.
Replacement filters are available from your
Black & Decker dealer (cat. no. FVF90):
• Remove the old filters as described
above.
• Fit the new filters as described above.
Technical Data
FV1200
Voltage Vdc 12.0
Weight kg 3.4
Charger
Input voltage Vac 230
Approx. chargingtime h 16
Weight kg 0.6