9
CARE AND CLEANING
This product contains no user serviceable parts. Refer service to qualified
service personnel.
• Make sure the unit is unplugged before cleaning. Wipe the blender base
using a damp cloth. Do not immerse the blender base in water.
• Lift the blending jar by the handle off the base.
• Remove lid and lid cap.
• Wash removable parts by hand or in the dishwasher. Place the blending
jar on the bottom rack and the rest of the parts on the top rack only.
Caution:
Blades are sharp. Handle with care when hand washing.
CLEANING TIPS:
• For quick cleanup, combine 1 cup hot water and a drop of liquid dish soap
in the blending jar.
• Cover and blend on Speed 2 for about 30 seconds.
• Discard liquid and rinse thoroughly.
Important:
• Do not place the jar parts in boiling liquids.
• Do not immerse the base in liquid. Wipe the base with a damp cloth and
dry thoroughly.
• Remove stubborn spots by rubbing with a damp cloth and nonabrasive
cleaner.
Note:
If liquids spill onto the base, wipe with a damp cloth and dry
thoroughly. Do not use rough scouring pads or cleansers on parts or finish.
TROUBLESHOOTING
Problem
Possible Cause
Solution
LED blinking
quickly
(100 msec/time)
Blender overheated or
button held longer
than 30 seconds.
Unit must be reset. Unplug to
reset. Let unit cool for at least
20 minutes.
Blender stops/
goes into
STANDBY mode
Blending time exceeds
2.5 minutes.
Re-select appropriate speed
setting to start blender.
Содержание FUSIONBLADE BL1550 Series
Страница 36: ...36 TM 13261 00 E S F T22 5002633 ...