Black & Decker FUSIONBLADE BL1550 Series, Инструкция по использованию и уходу

Страница: 5 / 36

5
GETTING STARTED
• Remove all packing material, any stickers, and the plastic band around the
power plug.
• Remove and save literature.
• Please visit www.prodprotect.com/applica to register your warranty.
• Wash all removable parts as instructed in CARE AND CLEANING
section of this manual.
HOW TO USE
This product is for household use only.
BLENDING JAR ASSEMBLY
1. Turn blending jar upside down and place flat on
counter top or work surface.
2. Place the blade assembly in bottom opening of the jar
with blades down. (A)
3. Place the jar base onto the blending jar and rotate clockwise until tight.
4. Turn assembled jar right side up.
5. Place lid with lid cap on blender jar.
6. Uncoil power cord from storage area under the blender
base.
7. Place the jar assembly on blender base. (B).
8. Blender is now ready for use.
USING YOUR BLENDER
Important: Appliance should always have lid in place when in use.
Caution: Do not place blender jar onto base when motor is running.
1. Make sure appliance is OFF.
2. Place ingredients to be blended into jar. For best results, add ingredients in
the following order:
a. Liquids first: liquids help the blades move easily when you turn on your
blender.
b. Powders (such as protein mixes and cocoa powder): powders should go
after liquids and before solids so they don’t fly up and stick to the lid.
c. Soft foods: such as bananas and cucumbers go next.
d. Hard foods: such as frozen fruits and raw veggies.
e. Ice cubes last: they help pull all other ingredients down towards the blades.
Tip:
When using frozen fruits it is not necessary to also add ice.
3. Place lid on jar; make sure lid cap is in place.
4. Plug power cord into outlet. Press ON/OFF button. The LED illuminates in
blue to signify the blender is in standby mode. After 60 seconds the unit will
automatically power off if no buttons are pressed. The LED will blink slowly
when the blender is in use.
A