Black & Decker DV4800, Оригинальное руководство пользователя

Страница: 7 / 24

Optimising the suction force
cleared regularly during use.
Emptying and cleaning the product.
Warning!
regularly.
u
Press the release latch (2) and pull the dust bowl (5)
straight off.
u
While holding the dust bowl over a bin or sink, pull out the
u
To replace the dust bowl, place it back onto the handle
Warning! -
WD9610)
u
Place the foam insert (10) into the centre of the wet/dry
7
ENGLISH (Original instructions)
Warning! Never use the appliance for wet applications without
cleaning.
u
u
water.
u
-
ever worn or damaged.
dealer:
part number WVF110-XJ
Maintenance
Your Black & Decker corded/cordless appliance/tool has been
designed to operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation depends
upon proper tool care and regular cleaning.
Warning! Before performing any maintenance on corded/
cordless power tools:
u
Switch off and unplug the appliance/tool.
u
Or switch off and remove the battery from the appliance/
tool if the appliance/tool has a separate battery pack.
u
Or run the battery down completely if it is integral and then
switch off.
u
Unplug the charger before cleaning it. Your charger does
not require any maintenance apart from regular cleaning.
u
Regularly clean the ventilation slots in your appliance/tool/
charger using a soft brush or dry cloth.
u
Regularly clean the motor housing using a damp cloth. Do
not use any abrasive or solvent-based cleaner.
Protecting the environment
Z
Separate collection. This product must not be
disposed of with normal household waste.
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product avail-
able for separate collection.
z
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent environ-
mental pollution and reduces the demand for raw
materials.
Battery
Z
If you want to dispose of the product yourself, the
battery must be removed as described below and
disposed of in accordance with local regulations.
u
Preferably discharge the battery by operating the appli-
ance until the motor stops.
u
Press the release button (2) and remove the dust bowl (5).
u
Remove the seven screws holding the body of the appli-
ance together.
u
Lift the housing cover away from the assembly.
u
Detach all lead connections from the battery pack.
u
Remove battery pack.
u
Place the battery in a suitable packaging to ensure that
the terminals cannot be short-circuited.
u
Take the battery to your service agent or to a local recy-
cling station.