9
Bagel Function |
No preheat needed for this function .
1 . Press the Bagel function button (
) . The blue light will illuminate .
2 . The oven will either default to factory function settings or to the last setting
used . (see Function Chart on page 11)
3 . If needed, press the time/toast shade button (
) to select the desired
shade . Up arrow for a darker shade, and Down for a lighter shade .
Note:
Shades 1-7 are available, 1 being the lightest and 7 being the darkest.
4 . Place food directly on rack in the middle rack position and press the Start/Stop
button (I/0) to begin toasting .
5 . There will be an audible beep once the toasting cycle is complete and the oven
will stop heating .
6 . Unplug the appliance when not in use .
Reheat Function |
No preheat needed for this function .
1 . Press the Reheat function button ( ) . The blue light will illuminate .
2 . The oven will either default to factory function settings or to the last setting
used . (see Function Chart on page 11)
3 . If needed, press the temperature button ( ) to select the desired
temperature . Up arrow for a higher temperature, and Down for a lower
temperature .
4 . If needed, press the time buttons ( ) to select the desired time . Up arrow
for a longer time period, and Down for a shorter time period . Select Stay On
by pressing the Down arrow past Zero . The Stay On icon ( ) will show in
the display panel .
5 . Place food on middle or low rack and press the Start/Stop button (I/0) to
begin reheating the food .
Note:
Use a metal, oven-tempered glass, or ceramic baking dish.
6 . If using the oven timer, there will be an audible beep once the cycle is complete
and the oven will stop heating . If not using the timer, press the Start/Stop
Button (I/0) once cycle is complete .
7 . Unplug the appliance when not in use .
OPERATING YOUR OVEN
