Black & Decker BS600, Инструкция по эксплуатации

Страница: 4 / 25

4
ENGLISH
Inspection and repairs
•
Before use, check the appliance for
damaged or defective parts. Check for
breakage of parts, damage to switches and
any other conditions that may affect its
operation.
•
Do not use the appliance if any part is
damaged or defective.
•
Have any damaged or defective parts
repaired or replaced by an authorised repair
agent.
•
Before use, check the power supply cord for
signs of damage, ageing and wear.
•
Do not use the appliance if the power supply
cord or mains plug is damaged or defective.
•
If the power supply cord or mains plug is
damaged or defective it must be repaired by
an authorised repair agent in order to avoid a
hazard. Do not cut the power supply cord
and do not attempt to repair it yourself.
•
Never attempt to remove or replace any
parts other than those specified in this
manual.
Additional safety instructions
for Smoothie Makers
•
Do not immerse the appliance, cord set or
plug in liquids
•
Always leave sufficient space around the
appliance for ventilation
•
Keep loose clothing, hair, jewellery, etc. away
from moving parts.
•
Do not use the unit if you have wet hands
•
Care is needed when handling cutting
blades, especially when removing the blades
from the bowl, emptying the bowl and during
cleaning.
•
“Switch off the appliance before changing
accessories or approaching parts which move
in use”.
Electrical safety
Before use, check that the mains voltage
corresponds to the voltage on the rating plate.
This appliance is double insulated in
accordance with EN 60335-2-14;
therefore no earth wire is required.
•
To avoid the risk of electric shock, do not
immerse the cord, plug or motor unit in water
or other liquid.
•
Check that the supply voltage shown on the
rating plate of the appliance matches that of
your electrical system. Any connection error
will invalidate the guarantee.
Mains plug replacement
If a new mains plug needs to be fitted:
•
Safely dispose of the old plug.
•
Connect the brown lead to the live terminal of
the new plug.
•
Connect the blue lead to the neutral terminal.
•
If the product is class l (earthed), connect the
green / yellow lead to the earth terminal.
Warning! If your product is class ll double
insulated (only 2 wires in the cord set), no
connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good
quality plugs
Any replacement fuse must be of the same rating
as the original fuse supplied with the product.