Black & Decker BPWM20W, Инструкция по эксплуатации

Страница: 23 / 104

Page 23
ENGLISH
SET UP & USE
RINSE & SPIN CYCLE GUIDE
Normal/Eco is the recommended wash cycle to wash up to a full load of normally soiled cotton
or linen clothing. The cycle (Normal/Eco on large load size and cold water temperature) has a
much longer spin time (34 minutes) than other cycles, which removes more water from your
clothes than other cycles, providing you with energy savings when drying your clothes in your
dryer. Hot and warm water temperatures are the same when using Normal/Eco. If you need a
higher temperature wash, use a different program.
Program
Load Size
Soak
time
(approx.)
Wash
Time
(ap-
prox.)
Rinse
Times
Final
Spin
Time
Total
Time
Default Scope
Normal Large
Sm – 15 min 1 7 min 32 min
Med – 15 min 1 12 min 37 min
Lg – 15 min 1 12 min 37 min
Heavy Large Sm, Med, Lg – 15 min 2 7 min 44 min
Delicate Large Sm, Med, Lg – 12 min 2 3 min 37 min
Quick Large Sm, Med, Lg – 3 min 1 3 min 15 min
Bulky Large Sm, Med, Lg 15 min 15 min 2 7 min 59 min
Spin Only – – – – – 24 min 25 min
Step 5: Start the cycle
Press the START/PAUSE button to start the washing cycle. When the
washing cycle begins, the Estimated Time in minutes for the cycle to
complete will show and count down in the digital display. Or, if Delay Start
is set, the display will count down the hours until the cycle begins, and then
change to a minute countdown for the cycle.
When the washer is running, you should pause the program and wait for the
tub to stop completely before you open the lid.
Control Lock
Press and hold the TEMP and PROGRAM buttons
simultaneously to activate this function. When Control Lock
is activated, the indicator light will turn on. The control panel
buttons will not function except for
POWER and the ability to
deactivate
Control Lock
by pressing and holding the
TEMP
and PROGRAM buttons again.