Black & Decker BG180, Оригинальное руководство пользователя, Страница: 5 / 16

5
ENGLISH
f. Dress properly. Do not wear loose clothing
or jewellery. Keep your hair, clothing and
gloves away from moving parts. Loose
clothes, jewellery or long hair can be caught in
moving parts.
g. If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used. Use of these devices can reduce dust
related hazards.
4. Power Tool Use and Care
a. Do not force the power tool. Use the
correct power tool for your application.
The correct power tool will do the job
better and safer at the rate for which it was
designed.
b. Do not use the power tool if the switch
does not turn it on and off. Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired.
c. Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
d. Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
e. Maintain power tools. Check for
misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tools operation.
If damaged, have the power tool repaired
before use. Many accidents are caused by
poorly maintained power tools.
f. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
5. Service
a. Have your power tool serviced by
a qualified repair person using only
identical replacement parts. This will ensure
that the safety of the power tool is maintained.
6. Electrical safety
Warning! If the power cord is damaged,
it must be replaced by the manufacturer,
authorized Black & Decker Service
Center or an equally qualified person in
order to avoid damage or injury. If the
power cord is replaced by an equally
qualified person, but not authorized by
Black & Decker, the warranty will not be
valid.
7. Labels on tool
The label on your tool may include the
following symbols:
Read In-
structions
Manual
Hz Hertz
Use Eye
Protection
W Watts Earthing
Terminal
Use Ear
Protection
min minutes Safety Alert
Symbol
V Volts Alternating
Current
../min Revolu-
tions or
Reciproca-
tion per
minute
A
Amperes Direct
Current
n
0
No-Load
Speed
Additional safety rules for bench
grinders
Basic information on grinding wheels
1. Put grinding wheel in individual package, and
keep in a dry and well-ventilated place.
2. Various shortcomings during installation and
operation can lead to bursting of grinding
wheels.
3. Ordinary grinding wheels are generally not
designed to withstand a greater lateral load.
4. Tap off cutting debris from the grinding wheel
always leads to damage of the grinding wheel.
5. Grinding wheels which may have an imbalance
burst easily.
6. An unbalance of a grinding wheel can not be
completely removed by withdrawing with a
diamond dresser.
7. Incorrectly stored grinding wheels can burst
immediately after switching on, or individual
small fragments fly away like a bullet.
• Always use proper guard with grinding wheel.
A guard protects operator from broken wheel