5
Outdoor Wireless Remote Control Outlets
A. PERFECT FOR LANDSCAPE, HOLIDAY AND SECURITY LIGHTING.
For both outdoor and indoor use
Operational range : Max: 100ft (30m)
Dual grounded outlets – can control two devices
Easy to install – just plug it in
B. EASY INSTALLATION:
1. One receiver supplied with one transmitter.
2. Plug the receiver into a 3-prong outdoor outlet, then plug the lights
or device to be switched into the receiver. Make sure that there is power
to the outlet that the receiver is plugged into. Let the receiver hang
downward so moisture does not accumulate in the outlets.
3. The device must be mounted in a vertical position with the receptacle
facing downwards and positioned with a minimum vertical length equal
to twice the unit. (see image on right side)
4. Red indicator light is lit when the outdoor receiver is “ON”.
C. OPERATION:
1. Press “ON” on remote to turn receiver ON.
2. Press “OFF” on remote to turn receiver OFF.
Control mode and settings.
A. Control illustration.
Timer Mode
OFF
ON
DUSK-DAWN
2 Hrs
4 Hrs
6 Hrs
8 Hrs
Function description
Always off
Always on
Turns power on at dusk
，
Turns power off at dawn
Turns power on at dusk
，
Turns off after 2-hour countdown
Turns power on at dusk
，
Turns off after 4-hour countdown
Turns power on at dusk
，
Turns off after 6-hour countdown
Turns power on at dusk
，
Turns off after 8-hour countdown
B. Mode setting.
Turn the function setting switch until the marking of chosen control mode on the dial is
aligned with the triangle-shaped marking on the timer body.
In ON/OFF mode, the power will always be on or off and the power will not be affected by the
photocell sensor.
The DUSK-DAWN mode uses the photocell sensor to sense if it is light or dark outside. When
the photocell sensor senses darkness, it will automatically turn the outlets ON. When the
photocell sensor senses daylight, it will automatically turn the outlets OFF.
The 2 Hrs/4 Hrs/6 Hrs/8 Hrs modes also use the photocell sensor to know when to turn the
outlets on and start the countdown of the time chosen. When the photocell sensor senses
darkness, it will automatically turn the outlets ON (thereby starting the countdown) and will
keep them on until the amount of time that has been chosen is up. Once the time is up, the
outlets will automatically turn OFF.