Black & Decker BDX2700, Инструкция по эксплуатации

Страница: 13 / 72

13 - ENG
2. Release quick-connect coupler
and twist nozzle to make sure it is
secure in coupler.
18
K
E
WARNING: flying object could
cause risk of serious injury. Ensure
nozzle is completely inserted in
quick-connect socket and quick-
connect snap ring is fully engaged
(forward) before squeezing gun
trigger.
Nozzle Color Spray Pattern Uses Surfaces*
Red
0˚ powerful pin-
point for very
intense cleaning
metal or concrete;
DO NOT use on wood
Yellow
15˚ intense cleaning
of unpainted
hard surfaces
grills, driveways, concrete
or brick walkways,
unpainted brick or stucco
White
40˚ cleaning of
painted or delicate
surfaces
Auto/RV, marine, wood,
painted brick and stucco,
vinyl, painted siding
Black
low pressure applies cleaning
solutions
Low pressure
spray is safe on all
surfaces. Always verify
compatibility of cleaning
solution prior to use.
*NOTICE:
The high pressure spray from your pressure washer is capable of
causing damage to surfaces such as wood, glass, automobile paint, auto striping
and trim, and delicate objects such as flowers and shrubs. Before spraying,
check the item to be cleaned to assure yourself that it is strong enough to resist
damage from the force of the spray.
hOW TO APPLY ChEMICALS/
CLEANING SOLVENTS (fIG. 19)
Applying chemicals or cleaning solvents
is a low pressure operation.
NOTE:
Use
only soaps and chemicals designed
for pressure washer use. Do not use
bleach.
To Apply Chemicals (BDX2700)
1. Ensure detergent siphon hose (F,
Figure 19) is attached to barbed
fitting location near high pressure
hose connection of pump as
shown.
f
19
2. Place other end of detergent siphon
hose with filter on it into container
holding chemical/cleaning solution.
NOTE:
For every 7 gallons of water
pumped 1 gallon of chemical/
cleaning solution will be used.