4
ENGLISH
but the temperature will eventually rise to that of the
surrounding air.
X
Observe hygiene rules common to any food preparation
appliance. Do not eat or drink perishable items that may
have spoiled or become contaminated.
X
Clean the appliance thoroughly after use and before
subsequent uses.
Features
This appliance includes some or all of the following features:
1.
Low vehicle battery LED indicator
2.
Hot LED indicator
3.
Cold LED indicator
4.
On/off switch
5.
Padded top
6.
Storage pouch
7.
Built-in heat dissipation fan
8.
Vehicle dc power cord
USE
Connecting to a portable 12 Vdc power supply, for use away
from the vehicle (fig.A)
X
Move the COLD/OFF/HOT switch (4) to the OFF position.
X
Insert the 12 Vdc plug on the power cord (8) into the 12 Vdc
socket on the portable power supply.
Note:
Keep the COLD/OFF/HOT switch (4) in OFF position for
five minutes before switching between HOT and COLD.
Using the appliance as a cooler
X
Move the COLD/OFF/HOT switch (4) to the OFF position.
Start the vehicle or turn the ignition switch to the
"accessory" position.
X
Insert the 12 Vdc plug on the power cord (8) into the
vehicle's 12 Vdc accessory outlet.
X
Move the COLD/OFF/HOT switch (4) to the COLD position.
X
The COLD LED indicator (3) will light to show that the unit
is cooling.
X
Place items into the cooler and close the lid. Do not overfill
the cooler, make sure that the lid can close.
X
Keep the cooler lid closed during use and close it quickly
after adding or removing items.
X
After use, move the COLD/OFF/HOT switch (4) to the OFF
position and remove all food items.
X
Disconnect the vehicle dc power cord (8) from the vehicle's
accessory outlet.
X
Clean the unit as described in the Maintenance section.
Using the appliance as a warmer (fig. A)
X
Move the COLD/OFF/HOT switch (4) to the OFF position.
Start the vehicle, or turn the ignition switch to the
"accessory" position.
X
Insert the 12 Vdc plug on the power cord (8) into the
vehicle's 12 Vdc accessory outlet.
X
Move the COLD/OFF/HOT switch (4) to the HOT position.
X
The HOT LED indicator (2) will light to show that the unit is
warming.
X
Put items into the warmer and close the lid. Do not overfill
the warmer. Make sure that the lid can close.
X
The unit's warming system is thermostatically controlled.
X
Keep the warmer lid closed during use, and close it quickly
after adding or removing items.
X
After use, move the COLD/OFF/HOT switch (4) to the OFF
position and remove all food items.
X
Disconnect the vehicle dc power cord (8) from the vehicle's
accessory outlet.
X
Clean the unit as described in the Maintenance section.
To change this appliance to a freezer (fig B)
X
Fill the sealable ice tray (9) (included) a quarter full with
water. Fit the lid and place the tray at the bottom of the
cooler.
X
Place the freezer insulation pad (10) (included) on top of the
sealed ice tray to convert the cooler to a freezer.
Hints for optimum use
The warmer takes about 100-120 minutes to reach its
maximum warm temperature (approx. 48 ºC). It is
recommended that items to be stored in the warmer be pre-
heated. This will assist the warmer in reaching the maximum
temperature as quickly as possible.
The cooler takes about 120-200 minutes to reach its
maximum cool temperature (approximately 27 ºC below that
of surrounding air). It is recommended that items to be
placed in the cooler be pre-chilled. This will assist the cooler
in reaching the lowest temperature as quickly as possible.
The travel cooler/freezer and warmer can be used with most
food and drinks, either cold or hot. Use with standard
household containers or ready-to-use food and drink
packaging.
MAINTENANCE
Your Black & Decker tool has been designed to operate over
a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Warning!
Before performing any maintenance or cleaning on
the appliance, unplug the appliance.
X
From time to time wipe the appliance with a damp cloth.
Do not use any abrasive or solvent-based cleaner. Do not
immerse the appliance in water.
