ENGLISH
8
Maintenance
Lubrication
Cleaning
@
Warning: unplug the tool before you use a cloth to
clean the housing. With the motor running, blow dirt
and dust out of all air vents with dry air at least once
a week. Wear safety glasses when performing this.
Exterior plastic parts may be cleaned with a damp
cloth and mild detergent. Although these parts are
highly solvent resistant, NEVER use solvents.
Tool Care
Avoid overloading the machine. Overloading will result in a
considerable reduction in speed and efficiency and the unit
will become hot. In this event, run the machine at no load for
a minute or two until cooled to normal working temperature
by the built in fan. Switching your machine on and off whilst
under load will considerably reduce the life of the switch.
Important
To ensure product SAFETY and RELIABILITY, repairs,
maintenance and adjustment (other than those listed in
this manual) should be performed by authorized service
centres or other qualified organizations, always-using
identical replacement parts. Unit contains no user serviceable
parts inside.
Accessories
Note: Accessory must be rated for use at speed equal to or
higher than nameplate RPM of tool with which it is being used.
@
CAUTION: The use of any non-recommended acces-
sories may be hazardous.
Protecting The Environment
Residual risks
z
Additional residual risks may arise when using the tool which
may not be included in the enclosed safety warnings. These
risks can arise from misuse, prolonged use etc.
u
Injuries caused by touching any rotating/moving parts.
u
Injuries caused when changing any parts, blades or ac-
cessories.
u
Injuries caused by prolonged use of a tool. When using
any tool for prolonged periods ensure you take regular
breaks.
u
Impairment of hearing.
u
Health hazards caused by breathing dust developed when
using your tool (example: working with wood, especially
oak, beech and MDF.)
Your Black and Decker power tool has been designed to
operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation depends upon
proper tool care and regular cleaning. Your tool is not
user-serviceable. Take the tool to an authorized Black and
Decker repair agent. This tool should be serviced at regular
intervals or when showing a noticeable change in performance.
Black and Decker power tools are properly lubricated at the
factory and are ready for use. Tools should be relubricated
regularly , depending on usage. This lubrication should only
be attempted by trained power tool repair persons, such as
those at Black and Decker service centers or by other
qualified service personnel.
The performance of any power tool is dependent upon the
accessory used. Black and Decker accessories are
engineered to high quality standards and are designed to
enhance the performance of power tool. By using Black and
Decker accessories will ensure that you get the very best
from your Black and Decker tool. Black and Decker offers a
large selection of accessories available at our local dealer or
authorized service centre at extra cost.
Even with the application of the relevant safety regulations
and the implementation of safety devices, certain residual
risks can not be avoided. These include:
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker
product needs replacement, or if it is of no further
use to you, do not dispose of it with household
waste. Make this product available for separate
collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials.
Local regulations may provide for separate
collection of electrical products from the household,
at municipal waste sites or by the retailer when you
purchase a new product.
