THERMOSTATIC CONTROL
Operating your Heater
HEATER CONTROL SWITCH
O
OFF
Fan Only
I
Heat Setting 1 (900W)
II
Heat Setting 2 (1800W)
Check that the heat control switch is set to Off position before plugging the appliance into the mains
supply.
Select heat output of 900 or 1800 Watts.
For greater economy, use the High Heat setting initially and then switch to the Low Heat setting.
For the Low and High Heat settings the fan remains at the same speed; only the element changes to
create the greater/lesser heat output.
THERMOSTATIC CONTROL
1. Rotate thermostat knob clockwise until you reach the maximum position.
2. When the room reaches a temperature that is comfortable for you, slowly turn the knob anti-
clockwise until the heater just turns off (you will hear a click).
3. The heater will now cycle on and off to maintain the comfort level you have set.
4. Take note of this setting position for future use.
7
HEATER CONTROL SWITCH
