Black & Decker BDAG710, Оригинальное руководство пользователя

Страница: 12 / 16

English
12
(original instructions)
@
Warning! No connection is to be made to the
earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 13 A.
Troubleshooting
Problem Possible cause Possible solution
Unit will
not start.
Cord not
plugged in.
Cord or switch
is damaged.
Plug tool into a
working outlet.
Have cord or switch
replaced at a
BLACK+DECKER
service center or
authorizedservicer.
Grinding and cutting accessory chart
Grinding Wheels
Type 27 guard Type 27 guard
Unthreaded backing flange
Type 27 hubbed wheel
Type 27 depressed center
wheel
Threaded clamp nut
Sanding Flap Discs
Type 27 guard Type 27 guard
Hubbed sanding flap disc
Unthreaded backing flange
non-hubbed sanding flap
disc
Threaded clamp nut
Type 41 Cutting Wheels
Type 41 guard Type 41 guard
Backing flange Backing flange
Abrasive cutting wheel Diamond cutting wheel
Clamp nut Clamp nut
Wire Wheels
Type 27 guard Type 27 guard
3 inch wire cup brush 4 inch wire cup brush
Sanding Discs
Rubber backing pad
Sanding disc
Threaded clamp nut
Protecting the environment
Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com