English
6
Fig. F
5
4
13
12
Using the GoPak 2 in 1 battery to
charge your USB device (Fig. G)
Plug the USB A end of your device specific cable
11
into the BLACK+DECKER GoPak 2 in 1 battery
14
and the other end of the cable into a UL or CSA listed
compatible device (Phone/Tablet/MP3/Wearable/
Game Controller/etc.). Charging will start automatically.
Fig. G
14
11
Functionality
The BLACK+DECKER GoPak 2 in 1 battery can power your
compatible BLACK+DECKER 12V GoPak MAX* tools or
power/charge your mobile devices. The compact, slim
battery housing is designed for portability.
-
GoPak Charge Input: Up to 2.4A**
-
GoPak Power Output: Up to 2.4A***
** Actual input charge rate is dependant upon power
adapter (not included).
***Actual output rate is dependant on the device.
USB Power Port
The BLACK+DECKER GoPak 2 in 1 battery is equipped with a
USB Type A power port. It delivers up to 2.4 amp total current.
nOTE:
The current delivered to device is dependent on user
device and user's chosen cable.
WARNING:
Ensure the terminal cap is securly
attached to the BLACK+DECKER GoPak 2 in 1 battery
when using it to power/charge your device.
•
Install terminal cap on the tool terminals.
•
Device charging from USB will start automatically when
device is connected.
•
To turn OFF, disconnect USB device.
Proper Hand Position (Fig. H)
WARNING:
To reduce the risk of serious personal injury,
ALWAYS
use proper hand position as shown.
Proper hand position requires one hand on the main handle.
Fig. H
On/Off Button (Fig. A)
1. To turn the light on, press the on/off button
1
.
2. To turn it off, press the button again.
Pivoting The Light Housing (Fig. I, J)
1. The LED light housing
2
can be pivoted by lifting it to
different positions within the 90 degree pivot range.
2. The LED flashlight can also be positioned on the battery
end to provide a greater range of light coverage as
shown in Figure J.
Fig. I
2
Fig. J
2