English
2
Additional Safety Information
WARNING: Do not place the worklight
in a position which may cause anyone to
intentionally or unintentionally stare into the
light.
Serious eye injury could result.
The label on your tool may include the following symbols. The
symbols and their definitions are as follows:
V ......................... volts
Hz .......................hertz
min .....................minutes
or DC ......direct current
...................... Class I Construction
(grounded)
…/min ................per minute
BPM ...................beats per minute
IPM .....................impacts per
minute
RPM ................... revolutions per
minute
sfpm ................... surface feet per
minute
SPM ....................strokes per minute
A .........................amperes
W .......................watts
or AC ...........alternating current
or AC/DC .... alternating or
direct current
...................... Class II
Construction
(double insulated)
no .......................no load speed
n .........................rated speed
......................earthing terminal
.....................safety alert symbol
.....................visible radiation
..................... wear respiratory
protection
..................... wear eye
protection
..................... wear hearing
protection
..................... read all
documentation
Important Safety Instructions
WARNING
!
When using the worklight,
basic precautions should always be followed,
including the following:
a ) Read all the instructions before using the worklight.
b ) To reduce the risk of injury, close supervision is
necessary when a worklight is used near children.
c ) Turn the worklight off when not in use and before
servicing or cleaning.
d )
Do not operate any worklight after it
malfunctions or is dropped or damaged in any
manner.
Return worklight to the nearest authorized
service facility for examination, repair, or electrical or
mechanical adjustment.
e )
To reduce the risk of electrical shock, do not put
worklight in water or other liquid.
Do not place
or store worklight where it can fall or be pulled into a
tub or sink.
f ) Only use attachments recommended or sold by the
manufacturer.
g ) This worklight is intended for indoor use.
NOTE: This worklight has a rating of IP20 which means
it has some level of protection from dust ingress. Refer
to IEC60529 IP20 for the specific meaning of this
rating. The battery does not have an IP rating on its
own.
Do not submerge worklight or battery in liquid.
SAVE THESE INSTRUCTIONS
SPECIFIC SAFETY RULES
WARNING:
When using electric appliances, basic
precautions should always be followed, including the
following:
• Read all the instructions before using the appliance.
• Only use attachments recommended or sold by
the manufacturer.
• During or immediately after use, don’t lay light flat on
lens surface.
• Don’t touch lens surface when bulb is lit or immediately
after use.
• Handle light with care around any flammable surface.
• Do not expose light or battery to wet or damp areas. Do
not expose light or battery to rain or snow.
• Do not wash light or battery with water or allow water to
get inside light or battery.
• While light is in use, do not cover with cloth or other
flammable materials due to increased risk of fire.
• Do not operate without lens cover assembly attached.
• For indoor household use only.
WARNING:
Burn hazard. Do not operate flashlight
or battery near flammable liquids or in gaseous or
explosive atmospheres. Internal sparks may ignite
fumes causing personal injury.
WARNING:
The lens gets very hot during use. To
reduce the risk of burns, do not touch hot lens. To
reduce the risk of fire, keep away from combustible
materials while in operation.
CAUTION:
When not in use, place tool on its side on
a stable surface where it will not cause a tripping or
falling hazard. Some tools with large battery packs
will stand upright on the battery pack but may be
easily knocked over.
SAVE THESE INSTRUCTIONS
BATTERIES
The battery pack is not fully charged out of the carton.
Before using the battery pack, read the safety instructions
below and then follow charging procedures outlined. When
ordering replacement battery packs, be sure to include the
catalog number and voltage.
READ ALL INSTRUCTIONS
Important Safety Instructions for All
Battery Packs
WARNING: Read all safety warnings and all
instructions for the battery pack, and power tool.
Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious
injury.
•
Do not charge or use the battery pack in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust.
Inserting or removing the