Black & Decker AIRSWIVEL BDASP100 Series Скачать руководство пользователя

Страница: 10 / 16

Maintenance And Care - Cleaning Dust Cup Filter

1. Remove the dust cup.

WARNING:

Turn off and unplug vacuum cleaner before performing

maintenance to the vacuum cleaner.

3. Open the dust cup

filter lid, located on

the top of the cup.

4. Remove the dust

cup foam filter.

2. Push the release

button, open the dust

cup and clean all

parts of the dust cup.

Maintenance And Care - Cleaning Exhaust Filter

Locate and unlock filter cover as shown.

Push left to un-lock, right to lock.

LOCK

Wash with water every 3 months, allow at

least 24 hours to dry and make sure it is dry

thoroughly before re-using.

Remove filter cover with filter.

Wipe with cloth over garbage bin,

removing dirt and debris.

filter cover

filter

Содержание AIRSWIVEL BDASP100 Series

















Результаты поиска

Содержание AIRSWIVEL BDASP100 Series

Отзывы:

Похожие инструкции для AIRSWIVEL BDASP100 Series

Бренды по названию

Популярные бренды

Black & Decker AIRSWIVEL BDASP100 Series, Инструкция по эксплуатации

Результаты поиска

Содержание AIRSWIVEL BDASP100 Series

Отзывы:

Похожие инструкции для AIRSWIVEL BDASP100 Series

Бренды по названию

Популярные бренды