One Year Free Maintenance
All B&D tools for Industry and Construction are covered under a one year free
maintenance program where B&D will inspect your tool for safety and provide
necessary maintenance or repairs, including normal wear and tear parts, for
one year, FREE OF CHARGE.
Full Warranty
All B&D tools for Industry and Construction are warranted to be free of any
defects in materials or workmanship. Upon thorough examination of tool,
B&D will repair or replace, at our option, any product that is determined to be
defective.
Conditions
The service/safety check and the warranty do not apply to: repairs made or
attempted by anyone other than an authorized B&D service location; misuse,
abuse, neglect, improper application of the tool; missing parts; or normal wear
and tear (after first year of ownership). Please return the complete unit, trans-
portation prepaid, to any B&D factory owned or B&D authorized service center
location (list provided with tool or see yellow pages under “Tools Electric”).
Every B&D tool is of the highest quality.
If you wish to contact us regarding this product, please call toll
free between 8:00am and 8:00pm ET, seven days a week:
1-800-9-BD TOOL
(1-800-923-8665)
8
icals or solvents to clean the tool. These chemicals could seriously damage
the engineering polymers used to construct your sander. If you typically
wrap the cord around the tool when you store it, leave a generous loop of
cord such that the strain relief does not bend. This helps prevent premature
cord failure.
IMPORTANT
To assure product SAFETY and RELIABILITY, particularly for double insu-
lated tools, repairs, maintenance and adjustment (excluding maintenance
described in this manual) should be performed by B&D service centers or
authorized service centers, using identical B&D replacement parts.
384282/6121/JUN97 5/2/02 2:00 PM Page 8
