Important Safety Instructions
WARNING: When using electric tools, basic safety precautions should
always be followed to reduce risk of fire, electric shock, and personal
injury, including the following:
READ ALL INSTRUCTIONS
Double Insulation
Double insulated tools are constructed throughout with two separate layers
of electrical insulation or one double thickness of insulation between you
and the tool’s electrical system. Tools built with this insulation system are
not intended to be grounded. As a result, your tool is equipped with a two
prong plug which permits you to use extension cords without concern for
maintaining a ground connection.
NOTE: Double insulation does not take the place of normal safety precau-
tions when operating this tool. The insulation system is for added protec-
tion against injury resulting from a possible electrical insulation failure
within the tool.
CAUTION: WHEN SERVICING USE ONLY IDENTICAL REPLACEMENT
PARTS. Repair or replace damaged cords.
Polarized Plugs
Polarized plugs (one blade is wider than the other) are used on equipment
to reduce the risk of electric shock. When provided, this plug will fit into a
polarized outlet only one way. If the plug does not fit fully into the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician to
install the proper outlet. Do not change the plug in any way.
FOR YOUR SAFETY - ALL TOOLS
Getting the most out of your tool.
Please take time to read this manual and pay particular attention to the safety
rules we’ve provided for your protection. If you have any questions about
your tool please call:
1-800-9-BD TOOL
(1-800-923-8665)
1
TM
SHROUD
SPEED
CONTROL DIAL
SANDING PAD
ON/OFF SWITCH
DUST BAG
ADAPTER
6121
6" Right Angle Random Orbit Sander/Polisher with Speed Control
384282/6121/JUN97 5/2/02 2:00 PM Page 4
