Getting the most out of your tool.
Please take time to read this manual and pay particular attention to the safety
rules we’ve provided for your protection. If you have any questions about your
tool please call:
1-800-9-BD TOOL
(1-800-923-8665)
WARNING: When using electric tools, basic safety precautions should always be
followed to reduce risk of fire, electric shock, and personal injury, including the
following:
READ ALL INSTRUCTIONS
2610-220
IMPORTANT SAFETY INSTRUCTIONS
2610-220 1/2" (13mm) Spade Handle Drill with 220 volt plug
CHUCK
TRIGGER
SWITCH
BRUSH
INSPECTION
CAP
LOCK
BUTTON
SPADE HANDLE
SIDE HANDLE
Double Insulation
Double insulated tools are constructed throughout with two separate layers
of electrical insulation or one double thickness of insulation between you and
the tool’s electrical system. Tools built with this insulation system are not
intended to be grounded. As a result, your tool is equipped with a two prong
plug which permits you to use extension cords without concern for
maintaining a ground connection.
NOTE: Double insulation does not take the place of normal safety
precautions when operating this tool. The insulation system is for added
protection against injury resulting from a possible electrical insulation failure
within the tool.
CAUTION: WHEN SERVICING USE ONLY IDENTICAL REPLACEMENT
PARTS. Repair or replace damaged cords.
154574-00/2610-220 5/17/02 1:45 PM Page 4
