www.bkte.pl
BKT ACBS - installation and configuration manual of the access control system with RS485 bus interface
68
Select Authentication Options tab
Select Edit
In the newly opened window, in the Normal Authentication tab:
In the Action field select the function [175]-Grant Door Access
with Normal Lock Pulse
Click OK
The door with the access point (reader) C1_Cab-01-front has been
configured as a two user entry.
The above configuration should be sent to the controller. See
chapter 9.4 Data synchronising.
9.9
Open door signalling with LED
The system enables configuration of signalling LEDs located on
the AC100 controller and the AB101 secondary set enclosures.
These LEDs are connected to reader outputs
LED1 – output OUT1 (IO1) of front door card reader
LED2 – output OUT1 (IO1) of rear door card reader
Please see 5.8 Diagram of functional circuits for operating the
cabinet door.
LED 1
LED 2
