BKI DRGV, Руководство оператора

Страница: 12 / 38

Rotisserie Oven Operation
10
Software Controls – Programming Screens
Screen Name Screen Description
Startup Appears when the Main Power Switch is placed in the on
position.
Controller Off Appears after the Startup screen displays. Indicates that the
controller is turned off. Touching anywhere on the screen
will turn the controller on and display the Recipe Selection
screen.
Recipe
Selection Appears once the Controller Off screen is touched. Touch
any recipe for 3 seconds to enter the programming mode.
Touch the
X button for 3 seconds to turn the controller off.
Program
Security
ENTER CODE
0 0 0 0
Appears upon entering the programming mode and is used
to enter a 4 digit passcode. When the controller is first
powered, 0000 is used to access the programming mode.
Upon subsequent access, if you don’t want to use a special
passcode but want to leave it 0000 just press the
GO button.
If you do want to use a special passcode, configure one
using the Basic Setup screen. Use the left and right arrow
buttons to move the cursor under the digit to be changed.
The up and down arrow buttons increase or decrease the
digit as desired. Touch the
GO button to submit the security
passcode. If the passcode is valid the Programming mode
Selection screen will appear. If the passcode is invalid the
Program Security screen will reappear showing the
passcode you entered. Touch the
X button to return to the
previous screen.
Program Mode
Selection Appears once a valid passcode is entered from the Security
screen. Touch the
BASIC SETUP option to change basic
controller parameters. Touch the COOK PROGRAMS
option to change cook parameters for a specific recipe.
Touch the
X
button to return to the Recipe Selection screen.
Basic Setup Appears when the BASIC SETUP option is touched from
the Programming Mode Selection screen. Use this screen to
configure the controller to display temperature in Fahrenheit
of Centigrade, to use short or long beeps at the end of a
cook cycle and to modify the four digit passcode. The
E in
the bottom right corner toggles between English and
Spanish on the display. Touch the
X button to return to the
previous screen.
Recipe Edit
Selection Appears when the COOK PROGRAMS option is touched
from the Programming Mode Selection screen. This screen
is used to select the recipe you want to edit. Use the up and
down arrow buttons to highlight the recipe then touch the
EDIT button. Touch the X button to return to the previous
screen.