BKI DNF Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 24

BKI DNF Скачать руководство пользователя страница 13

Doughnut Fryer

Operation

11

Item #

Description

Function

1

Hinge Casting

Enables you to raise and lock the Upper Control Panel
(including heating elements) for cleaning the oil vat.

2

High Limit Reset Switch

If the heating elements inside the vat reach an unsafe
temperature, power is automatically removed from the control
panel and elements. Pressing this switch returns power to the
control panel and elements.

3 Thermostat

Light

Illuminates

red

indicating that the heating elements are

activated.

4

Thermostat Knob

Used to set the temperature of the shortening.

5 Pump

Motor

Reset

Switch (DNF-F only)

This is a red push-button switch on the end of the pump motor.
If the motor overheats while filtering, it will automatically shut off.
Wait 15 minutes to allow motor to cool before pressing this
switch.

6

Drain Lever

DRAIN OPEN – When placed in this position, the drain valve
opens and shortening in the vat drains into the oil container.
Also power is removed from the control panel and elements.

DRAIN CLOSED – When placed in this position, the drain valve
is closed to prevent shortening from draining into the oil
container.

7

Handlebar Union

(DNF-F only)

Used to connect the filter screen assembly to the pump motor
piping or disconnect the filter screen assembly from the pump
motor piping.

8

Portable Filter Power

Receptacle (DNF only)

Used to supply power to the portable filter.

9

POWER ON/OFF Switch

Used to control power to the fryer.

10 POWER

ON/OFF

Indicator

This light illuminates to indicate that power is being supplied to
the fryer.

11 FILTER

MOTOR

ON/OFF Switch

Used to control power to the pump motor (DNF-F) or portable
filter power receptacle (DNF). For a DNF-F, when this switch is
ON, power is applied to the motor and shorting is pumped into
the vat. The POWER switch must be ON in order to activate this
switch.

12 FILTER

MOTOR

ON/OFF Indicator

This light illuminates to indicate that power is being supplied to
the pump motor (DNF-F) or portable filter power receptacle
(DNF).

«
...
11
12
13
14
15
...
»

Содержание DNF

























Отзывы:

Нет отзывов