bk ultrasound bk3500, Руководство пользователя

Страница: 24 / 64

24 Chapter 2 April 2017 bk3500 User Guide (16-01410-EN-04)
Battery Status
While the system is operating, battery status is visible both on the monitor (in the
bottom right-hand corner) and on the display on the battery compartment.
•
When the system is plugged into a power outlet, battery status is shown as
percent (%) of capacity remaining.
•
When the system is running on the battery, battery status is shown as time
remaining in “hours:minutes”.
NOTE:
The time displayed is an estimate based on typical use; for continuous
imaging, the actual time available will be less than indicated on the display.
Information Available on the Monitor
The battery status indicator appears in the bottom right-hand corner of the monitor.
Figure 2-20. Battery level shown as % or as time available.
A message appears on the monitor when a battery reaches the end of its lifespan and
needs replacing. For information about the disposal of depleted batteries, see
page 40.
Low Battery
When battery capacity is very low,
•
An alarm sounds every 15 seconds
•
A message appears on the monitor
•
The on-screen battery indicator turns red
•
The display on the battery compartment blinks regularly
Figure 2-21. Low battery message.
The low-battery message informs you that the battery level is low and that the system
will shut down when the system monitor clock matches the time stamp in the
message (shown here as 13:18:58).
The display on the battery compartment begins to blink regularly when the low
battery threshold is met, and it continues to blink even after the critical low battery
threshold is met and the system has shut down.
Caution BS-c1
If the battery reaches the auto-shutdown level, plug in the system and keep it
plugged in until the battery recharges to
at least 10 %.