BK Radio KNG Series, Руководство по обслуживанию

Страница: 30 / 248

BK Radio Page 2-15
operation and Programming
DUal moDe sCan [DsCn]
Conventional and Trunking Channels
Dual Mode scan provides the ability to scan trunking and conventional channels simultaneously.
note: the Dual mode scan list must be setup using the PC radio editor and cannot be
changed by the radio user.
When Dual Mode Scan is turned on the D icon is displayed and the radio scans all channels in the
dual mode scan list.
Dual Mode Scan can be assigned to a switch or as a button or menu list item. For best operation,
Dual Mode Scan should be assigned in both conventional and trunking global settings with the PC
editor.
enHanCeD sCan [esCn]
Conventional Channels
Enhanced Scan combines Priority Scan and Channel Scan to one switch/button. Enabling
Enhanced Scan will turn on both Priority and Channel Scan.
PrioritY sCan [PsCn]
Conventional Channels
Two channels can be designated as priority channels. When Priority Scan is on, these channels are
monitored for incoming traffic. When a qualified signal is detected the speaker is opened to listen to
the message.
If a message is detected on the channel designated as Priority 2, the radio will continue to monitor
Priority 1 channel for activity. If activity is detected the radio will switch to the Priority 1 channel.
When used in conjunction with Channel Scan, the radio monitors the Priority channels and will
switch from a scanned channel to the Priority channel if a qualified signal is detected.
Depending on radio setup, priority channels can be tied to the currently operating zone or
can be assigned to a specific channel regardless of the operating zone.
Channels designated as Priority channels are identified by the P1 or P2 symbol at the top of the
LCD display. When Priority Scan is on, the
C
P
symbol will be shown.
Priority Scan operation can be a switch or as a button or menu list item.
Trunked Channels
When on trunked channels, Priority Scan is used to turn system scanning on or off.
PrioritY CHannel seleCt [Pri]
Conventional Channels
Depending on programming, priority channels can be radio-wide (System) or zone specific (Zone).
Radio-wide priority channels are monitored regardless of the current operating zone. (See Priority
Scan for more details.)
If enabled the user can use the keypad to change the priority channels. Priority Channel Select can
be assigned to a switch or as a button or menu list item.
selecting a system Priority Channel
Open the menu and select the System Priority channel you wish to change.
Press “ENTER” to open System Priority Channel menu.
Options:
off - Disables the priority channel.
Use main - Uses the selected channel as the priority channel.
select - Assigns a specific channel as the priority channel.