BK Radio KNG Series, Руководство по обслуживанию

Страница: 16 / 248

BK Radio Page 2-1
seCtion ii
oPeration anD ProGramminG
2.1 General information
This section contains information concerning the installation and programming of the BK Radio KNG
APCO Project 25 digital radios.
UnPaCKinG anD insPeCtinG eqUiPment
Exercise extreme care when unpacking the equipment. Make a visual inspection of the unit for evidence
of damage incurred during shipment. If a claim for damage is to be made, save the shipping container
to substantiate the claim. The claim should be promptly filed with the transportation company. It would
be advisable to retain the container and packaging material after all equipment has been removed in the
event that equipment storage or reshipment should become necessary.
BatterY installation
installing the Battery
1. Turn the radio off.
2. Align the tabs on the bottom of the battery with the slots on the radio.
3. Push the top of the battery toward the radio until release tab “clicks”
into place.
removing the Battery
+ TS ON
-
Release Tab
1. Slide the release tab toward the bottom of the radio.
2. Pull the top of the battery out.
(Approximately 30
o
)
3. Pull up to remove the battery pack.
note: All information programmed into the radio is maintained even when the battery pack is removed.
BK Radio battery packs are available in a variety of capacities and types for special applications.
Rechargeable battery packs can be charged separately or while attached to a radio.
Periodically check the contacts on the battery pack for dirt that could prevent a good electrical contact
with the charging base.