BK Precision DAS30, Руководство пользователя

Страница: 7 / 82

7
6 Direct Mode 33
6.1 Launching the printing 33
6.2 Configuration of print 34
6.2.1 Relaunching the printing 35
6.2.2 Writing information 35
7 Memory Mode 36
7.1 Setup and start of the data acquisition 36
7.2 Sampling period 37
7.3 Internal memory, blocks 37
7.4 Trigger position 38
7.5 Double Trigger mode 38
7.6 Recording 38
7.7 Memory output 40
8 File Mode 42
8.1 Setup and triggering of the data acquisition 42
8.1 Restrictions 43
9 Go/No Go Mode 44
9.1 Setup and launching of the data acquisition 44
9.2 Blocks: parting of the internal memory in blocks 44
9.3 Real time save: simultaneous record of the data acquisition into a file 44
9.4 Start: start condition of the data acquisition 45
9.5 Automatic: automatic stop when the block is full 45
9.5.1 Creation of the template 45
9.6 Use of the template 46
10 Power Analysis Mode 47
10.1 Power Analysis 47
10.2 Network setup 48
10.3 Wiring and check 49
10.4 Fresnel diagram 50
10.5 Warning messages 50
10.6 Recording additional channels 50
10.7 Real time display of the signals 50
10.8 Power analysis setup 52
10.9 Parameter acquisition file 52
10.10 Record launch 52
10.10.1 Manual launch 52
10.10.2 Automatic trigger 53
10.10.3 Parametric trigger 53
10.11 You can select a stop condition (recording time or manual stop) 53
10.11.1 Trigger according to an inrush 53
10.11.2 In version 1.1 of the firmware or later 54
10.11.2.1 Trigger according to a duration or a date 54
10.12 Recordable parameters 54
10.12.1 Voltage and Current 54
10.12.2 Power 54
10.12.3 Power Factor 54
10.13 Record 55
10.14 Measurement process 56
www.
GlobalTestSupply
.com
Find Quality Products Online at: sales@GlobalTestSupply.com