BK Precision DAS30, Руководство пользователя

Страница: 29 / 82

29
Load from disk : loads a configuration from a file in the internal flash disk or an USB stick
Save to disk : saves a configuration into a file in the internal flash disk or an USB stick
Save ASCII file to disk : saves a configuration into ASCII file in the internal flash disk or an USB stick
1 Save setup files
Press Save to disk
You can type the name of the file with the alphanumerical keyboard displayed on screen.
Advice: Do not save files to the root of the disk; create directories for a more efficient management.
2 Load setup files
Press Load from disk
Select the directory and then the file to load, and click Load .
Attention: you will lose the pending configuration.
3 Save data acquisitions
There are 2 ways to save data acquisitions into the device: - in Manual mode after a data acquisition - in Real Time
during a data acquisition.
Manual :
Available under every mode; you can access it from the function after stopping
1. Read block: lire un bloc mémoire
2. Selection of the block to read
3. Read a recorded file
4. Write data into a file: Record the data displayed on screen into another file.
5. Close the window
•
Real time :
Available in Direct , Memory and Template modes after validation of Real Time Save in the triggers page:
As soon as the record is launched, the device saves the samples into the file. The file closes when the data acquisition is
done.
If the data acquisition is waiting for a start trigger, the device records into the file all points before this trigger.
When the data acquisition stops, the file will include more points than the memory block that was used for the data
acquisition.
In both cases – Manual or Real Time record – the date of the file is the date when the file was closed.
www.
GlobalTestSupply
.com
Find Quality Products Online at: sales@GlobalTestSupply.com