Battery Capacity Analyzer User Manual
18
4.3.3 Numeric type fields
If the field has numeric digits it can be changed by
1. Pressing the arrow buttons.
2. Press and hold is also supported to increment and decrement the values quickly.
3. Press the button to save the changes in the database or the button to exit without saving.
View Edit Records
Add New Record
Load Test
System
View Edit Records
Add New Record
Load Test
System
Rec: 012
Dat:
Tme:
Bld:
3. Press the button to keep this new blank record. If desired continue adding information to the record fields.
Tip:
Be sure to press the button or the changes will be lost.
Tip:
It is much easier to add, edit and arrange new records with a computer and the included application software
4.5 Load Test
The Load Test mode allows the user to set the load current and the duration for testing control panel output circuits.
1. From the Main menu use the buttons to navigate to the Load Test and press the Enter button.
4.4 Add New Record
The new blank record can be added to the database if the database is not full.
1. From the Main menu use the buttons to navigate to the Add New Record.
2. Press the button to select and add the new record.
Example: If the 603B has 11 records and a new record is added it will be assigned to the next logical memory location in
this example, 012.
Battery Capacity Analyzer User Manual
19
2. The Load Test will open with the cursor located in the Load Current, LC: field. Press the to increase the current
to lower the value.
3. Press the right arrow key to move to the Load Time field LT: the cursor will move to this increase or decrease the LT
time.
4. Press the button to start. The display back light will be turned off during the test. Press the Cancel button to
stop the test.
5. When complete the display back light will illuminate and the voltage open VO: and voltage loaded, VL: will be
displayed.
LC : 10.0A
LT: 5.0sec
VO : -- . --V
VC: -- . --V
Arrow Keys to Set
TEST Key to Test
LC : 10.0A
LT: 5.0sec
VO : 12.79V VC: 11 . 91V
Arrow Keys to Set
TEST Key to Test
View Edit Records
Add New Record
Load Test
System
Main Menu level
The 603B uses internal temperature sensors to automatically control the cooling fan speed. It is normal for the fan to turn
on, speed up and turn back off based on usage.
Tip:
The System menu allows the user to manually turn on for testing or additional cooling.
4.6 System
The System menu is used to view and change the 603B system configuration. This section describe each of these
settings. The System menu is accessed from the Main menu.
1. Power up the 603B, press the button. Five rows are presented on the Main Menu.
2. Use the keys to move the point to the “Systems” row and press the button.
