10
1-4. Supplied Accessories
l
User’s Manual --------------------------------------------------------------1
l
BNC cable -------------------------------------------------------------------1
l
Power cord-------------------------------------------------------------------1
l
Spare Fuse-------------------------------------------------------------------1
2. INSTALLATION
2-1. Initial Inspection
This instrument was carefully inspected both mechanically and electrically before
shipment. It should be physically free of damage. To confirm this, the instrument
should be inspected for physical damage which may have occurred in transit. Also,
verify that all supplied accessories have been included.
2-2. Connecting AC Power
This instrument requires 115V AC, 50-60 Hz power through a 3-conductor AC
power cable to be plugged into a three-contact electrical outlet to secure grounding.
If adapted into a 2-conductor cable, use the ground terminal on the rear panel for
grounding the instrument.
CAUTION
THIS INSTRUMENT IS SET TO 115V, AC. BEFORE TURNING ON THE POWER
TO THE INSTRUMENT, MAKE SURE THE VOLTAGE OF THE POWER SOURCE
IS 115V, AC.
2-3. Cooling and Ventilation
No special cooling and ventilation is required. However, the instrument should be
operated where the ambient temperature is maintained.
2-4. Position
This instrument is built as a bench-type instrument with rubber feet and tilt stand
in place. The stand-up angle can be adjusted by changing the angle of the
carrying handle.
