BJM Pumps FAHRENHEIT SK-F Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 7 / 64

8
BJM Pumps
®
SK-F & SKX-F Series pumps are designed to operate fully
submerged . Data sheets can be obtained online at www.
flowsolutions
.com or by
calling
Industrial Flow Solutions Operating,
LLC at 860-399-5937.
•
Do not run pump dry.
•
Pump liquid should not exceed a maximum temperature of 200°F (93°C).
•
Never place the pump on loose or soft ground. The pump may sink, preventing
water from reaching the impeller. Place on a solid surface or suspend the pump
with a lifting rope/chain. The SK-F & SKX-F Series pumps are provided with a
suction strainer to prevent large solids from clogging the impeller. Any spherical
solids which pass through the strainer should pass through the pump.
•
For maximum pumping capacity, use the proper size non-collapsible hose or rigid
piping. A check valve may be installed after the discharge to prevent back flow
when the pump is shut off.
•
Take stand off of pump when using slide rail. Keep stand and reattach when
transporting or handling the pump.
POSITIONING THE PUMP