manualshive.com logo in svg

Bizerba VS 12 F--P, Руководство по эксплуатации

Поделиться
Скачать
Bizerba VS 12 F--P Скачать руководство пользователя страница 10

About these instructions

Operating instructions VS12 /C /F /F-P /W

1 - 2

6.080.98.5.10.13

 en

1

1.4

Warnings

Warnings are divided into danger levels by the signal word above the warning symbol.
Structure of warnings and meaning of signal words are described in these instructions as
follows.

DANGER

Source of danger with high risk of imminent danger to persons!
The consequences are:
life threatening injuries,
severe damage to health.

–

Measures to avoid the danger are specified.

WARNING

Source of danger with medium risk with potentially threatening
danger for personnel!
The consequences can be:
serious injuries,
damage to health,
serious damage to property.

–

Measures to avoid the danger are specified.

CAUTION

Source of danger with slight risk with potentially threatening dan-
ger for personnel!
The consequences can be:
injuries,
damage to property.

–

Measures to avoid the danger are specified.

CAUTION

Source of danger, improper use!
Damage to property can result.

–

Measures to avoid the danger are specified.

Содержание VS 12 F--P
















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды