Ver. 1.00
- 15 -
SRP-S320
Caution
- Only use a power supply provided by Bixolon. Bixolon shall
bear no responsibility for damage caused by using a third-party
power supply.
- Check the power supply’s label to check its electronic specs.
- When removing the power supply, make sure you have a firm
grasp of the plug terminal of the power cable and the printer
and pull horizontally.
- When connecting or disconnecting power, make sure to remove
the power supply from the power outlet before removing.
- Pay attention to the direction in which you insert the power
cable.
Warning
Do not connect a voltage out of the specifications of the power
supply. It can cause damage to the product or a fire.
1-4 Reconfiguration of Printer
• This product supports virtual memory switch change the use the virtual memory switch utility.
Use virtual memory switch management function for self-diagnosis.
Note
- Using the virtual memory switch setting, you can adjust the print speed
& print density in three steps.
- Refer to the utility and service manual for more information.
Caution
Make sure to turn the printer off and on again after using the virtual
memory switch utility to adjust the settings of the product.
