SRP-Q200
1-3 Cash drawer Port
• Connect the cash drawer cable to the drawer kick-out port on the rear side of the printer.
Pin No.
Signal Name
Direction
1
Frame Ground
-
2
Drawer Kick-out Drive Signal 1
Output
3
Drawer Open/Close Signal
Input
4
+24V
-
5
Drawer Kick-out Drive Signal 2
Output
6
Signal Ground
-
Caution
- Use a cash drawer that meets the printer specifications.
Using a cash drawer that is inappropriate to the specs or using
it as a power supply for a separate device may result in
damage to the product.
- Do not connect a telephone line to the drawer kick-out port.
Otherwise, the telephone line and the computer may be
damaged.
- Do not allow a foreign object such as a conductor to touch
the drawer kick-out port.
This may result in damage to the product
- Make sure to use a cash drawer with an internal coil resistance of
24
Ω
or higher. (The maximum current is 1A.)
- The open signal time for the cash drawer should not exceed 0.8
seconds. After opening the cash drawer, make sure to idle for at
least 3.2 seconds (at least 4 times that of the open signal time)
before operating it.
Drawer Kick-out Port
Ver. 1.00
- 11 -
