Rev. 1.11
- 19 -
SRP-280
5-2 Paper Width Adjustment
This printer supports the use of two-inch and three-inch paper.
To use two-inch paper, install the two-inch paper guide as shown below.
1) Turn off the printer power and open the printer cover.
2) Confirm the location of the hole for the “two-inch paper guide” inside the printer.
3) Insert the
“two-inch paper guide” into the hole as shown above.
(Affix the
“two-inch paper guide” securely so that it does not shake loose.)
4) Change dip switch 2-1, on the under side of the printer, from OFF to ON.
5) Turn on the printer power.
6) Install the two-inch paper roll and use.
Printer Front
Printer Rear
Two-Inch Paper Guide
