BIXOLON SMP6350, Руководство пользователя

Страница: 46 / 59

Rev. 2.03 - 46 -
SMP6350
6-3-4 Precautions during mounting platen roller block
- The outer case that the platen roller block is mounted on must be designed to have
sufficient strength to avoid impact, twist, deformation by external force, or moving, and
the pivot axis for mounting the outer case must be designed to have no slack in front
and back or left and right direction. Otherwise it may cause problems such as paper
cutting failure, paper jam, or degradation of printing quality due to unstable closing of
the outer case. Conduct sufficient verification by actually using the device.
- Design the secure door pivot system as the force is applied to the outer case while
installing or removing the platen roller block. Use shaft materials for the pivot axis of the
door pivot system, and the platen roller block must be mounted in a stable fashion.
- If the printer mechanism and the door pivot system are not installed correctly, the platen
roller block may not be installed correctly, or it may case problems such as printing
failure, cutting failure, rough cutting surface, or shorten the life of the cutter.
- When installing new thermal paper, install it while pressing the center of the outer case
of the door pivot system. Installing by pressing just one side may cause problems in
installing the platen roller block, which may result in printing failure or cutting failure.
Guide the users so that they always press the center of the outer case to install new
paper.