Rev. 1.00
- 37 -
SLP-TX220x/TX223x
7. Appendix
7-1 Specifications
Item
Description
Printer
Printing Method
Thermal Transfer / Direct Thermal Printing
Dot Density
SLP-TX220 : 203 dpi (8 dot/mm)
SLP-TX223 : 300 dpi (11.8 dot/mm)
Printing Width
SLP-TX220 : Max 54 mm (Max. 2.13
”)
SLP-TX223 : Max 56.9 mm (Max. 2.24
”)
Printing Speed
SLP-TX220: Max. 152.4 mm/sec (Max. 6ips)
SLP-TX223: Max. 101.6 mm/sec (Max. 4ips)
Paper
Width
15 ~ 60 mm (0.59 ~ 2.36
”)
Roll
Max 130 mm
(Max. 5.12”)
Core
12.5 ~ 38.1 mm (0.5
~ 1.5”)
Ribbon
Length / Width
Max 74m / 58 mm (2.28
”)
Type (Outside)
Wax, Wax/Resin, Resin
Core
0.5”
AC
Adapter
Input Voltage
AC 100~240V
Frequency
50/60 Hz
Output
Voltage / Current
DC 24V ±5% / 2.5A
: symbol means directly current(dc.)
Usage
Conditions
Temperature
5 ~ 40
℃
(Operating)
-20 ~ 60
℃
(Storage)
Humidity
(except for paper)
10 ~ 80 % RH (Operating)
10 ~ 90 % RH (Storage)
※
Note
- Printing speed can vary depending on the data transmission speed and combination of
control commands.
- This equipment is for indoor use and all the communication wirings are limited to
inside of the building.
- The switch is the disconnecting device. Turn off switch from any hazard.
7-2 Label Types
The label types used with this printer are as follows.
• Control Labels: PP
• Other Labels: PET