Rev. 1.00
- 17 -
SLP-TX220x/TX223x
3-4-3 Ribbon Removal
1) When you need to separate the current ribbon, Open the Ribbon Cover and cut it by
knife or similar tool. (Take care not to injure hands)
2) Open the Paper Cover and remove the ribbon and core by pushing from left to right.
3-4-4 Ribbon Sensor Activation
Ribbon detection sensor is disabled by default factory settings. Check the settings related
to ribbon detection sensor if printing does not stop when the printer is out of ribbon or
ribbon is broken.
* Ribbon detection sensor can be enabled by command control. And default setting can
be changed by Unified Label Utility-II.
※
CAUTION
- When replacing a ribbon, keep affixed the core of the fully used ribbon to the ribbon
coiling portion on the other side and do not discard as its use is required.
Cutting