Rev. 1.04
- 18 -
BK3-31
* 1) When printing starts, the LED blinks. And when the cutting command processing is
completed, the LED turns off.
* 2), 3) When the Presenter ejects the paper, the LED blinks. And when paper is taken,
the LED turns off.
(This function is only supported by the presenter model)
14) MSW 14
Switch
Function
ON
OFF
Default
1~8
-
-
-
OFF
Note
- Use unified utility or self-test mode to change the virtual memory
switch setting.
- Refer to the utility and service manual for more information.
Caution
Make sure to turn the printer off and on again after using
the virtual memory switch utility to adjust the settings of the
product. To change the DIP switch setting, turn off the printer power.
Changing the DIP switch setting while the power is on may cause a short
circuit and result in printer malfunction.
Supports all BIXOLON software only when set to Emulation 2 (BXL /
POS).
Содержание BK3-31
