BIXOLON BK3-31, Руководство пользователя

Страница: 15 / 42

Rev. 1.04
- 15 -
BK3-31
5) MSW 5
Switch Function ON OFF Default
1
Auto cutter selection * Refer to following Table 7
OFF
2 OFF
3
Paper save mode * Refer to following Table 8
OFF
4 OFF
5
Paper save mode
cutting correction
Enable Disable OFF
6
Auto line feed
(CR mode)
Enable
(LF)
Disable
(Ignore)
OFF
7 - - - OFF
8 Near-end sensor Disable Enable OFF
* Table 7
– Auto Cutter Selection
Auto Cutter Selection 5-2 5-1 Remark
Full cut OFF OFF Default
Partial cut OFF ON
Programmable cut ON OFF
No cut ON ON
* Programmable cut is operated according to the parameters of GS V command, while others
operate as partial cut.
* Regardless of settings, only Full-Cut is supported for Ticket-mode or Presenter mode.
* Table 8
– Paper save mode
Paper save mode 5-4 5-3 Remark
Disable OFF OFF Default
Level 1 OFF ON
Level 2 ON OFF
Level 3 ON ON
6) MSW 6
Switch Function ON OFF Default
1~8 - - -
OFF
7) MSW 7
Switch Function ON OFF Default
1
Print width selection * Refer to following Table 9
OFF
2 OFF
3 - - - OFF
4 - - - OFF
5 - - - OFF
6 - - - OFF
7
black mark sensor
selection
Right Left OFF
8 - - - OFF
* Black mark sensor selection applies only when DIP switches 1-4 are ON.
* Select sensor from paper exit as standard.