BIXOLON 275C - SRP Two-color Dot-matrix Printer, Руководство пользователя

Страница: 53 / 100

CHAPTER 4
Control commands list
4-17
FS p
[Name] Print NV bit image
[Format] ASCII FS p n m
Hex 1C 70 n m
Decimal 28 112 n m
[Range] 1 ≤ n ≤ 255
m = 0, 1, 48, 49
[Description] Prints a NV bit image n using the mode specified by m .
m Mode Scaling for horizontal Scaling for vertical
0, 48 Normal x 1 x 1
1, 49 Double-width x 2 x 1
FS q
[Name] Define NV bit image
[Format] ASCII FS q n [xL xH yL yH d1...dk]1...[xL xH yL yH d1...dk]n
Hex 1C 71 n [xL xH yL yH d1...dk]1...[xL xH yL yH d1...dk]n
Decimal 28 113 n [xL xH yL yH d1...dk]1...[xL xH yL yH d1...dk]n
[Range] 1 ≤ n ≤ 255
1 ≤ ( xL + xH x256) ≤ 1023( 0 ≤ xL ≤ 255, 0 ≤ xH ≤ 3)
1 ≤ ( yL + yH x256) ≤ 288( 0 ≤ yL ≤ 255, yH = 0.1)
1 ≤ d ≤ 255
k = ( xL + xH x 256) x ( yL + yH x 256) x 8
Total defined data area is 256 KB
[Description] Defines NV bit image specified.
- n specifies the number of defined NV bit images.
- xL , xH specifies ( xL + xH x 256) bytes in the horizontal direction for the NV bit image you
defined.
- yL , yH specifies ( yL + yH x 256) bytes in the vertical direction for the NV bit image you
defined.
- d specifies the definition data for the NV bit image.
- k indicates the number of the definition data. k is a parameter for an explanation; therefore, it
does not need to be transmitted.
GS ( A
[Name] Execute test print
[Format] ASCII GS ( A p
L
p
H
n m
Hex 1D 28 41 02 00 n m
Decimal 29 40 65 2 0 n m
[Range] 1 ≤ m ≤ 3, 49 ≤ m ≤ 3
[Description] Executes a specified test print.
- p
L
and p
H
specify the number of parameters following n to ( p
L
+ p
H
x 256) bytes.
- n specifies paper used for the test print as follows:
n Paper
0, 48 Basic sheet (paper roll)
1, 49
2, 50
Paper roll
- m specifies a type of the test print as follows:
m Type
1, 49 Hexadecimal dump
2, 50 Printer status printing
3, 51 Rolling pattern