BIXOLON 275C - SRP Two-color Dot-matrix Printer Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 100

background image

2-2

• Errors that are impossible to recover

Error

Description

ERROR LED blinking pattern

Recovery

R/W error in memory
or gate array

After R/W checking, the
printer does not work
correctly.
Writing to, reading out, or
erasing the NV memory for
image scanning results
does not work correctly.

Recovers automatically
when the rear cover is
closed.

High voltage error

The power supply voltage
is extremely high.

Impossible to recover.

Low voltage error

The power supply voltage
is extremely low.

Impossible to recover.

CPU execution error

The CPU executes an
incorrect address or I/F
board is not connected.

Impossible to recover.

Print head temperature
detection circuit error.

There is an abnormality is
the print head temperature.

200ms

Impossible to recover.

NOTES

If you see this light blinking, turn off the printer for a few seconds and then turn it back on.
If the light is still blinking, call your supervisor or a service person.

▌

2.2 The printer does not start printing

•

Are any of the operation panel lights on, If no operation panel lights are on, check the following:

- Make sure that the printer is turned on.

- Make sure that the power supply cable is correctly plugged into the printer and to the power outlet.

•

If any of the lights are on, please check the following:

- If the POWER LED is blinking, the printer is not ready yet.

Wait until the light quits blinking and the printer is ready to use.

- If the ERROR LED is on (but not blinking), the printer is off line. Check to see that the covers are closed

and check the paper state. See "Installing paper roll" (1.5) in Chapter 1 for instructions on installing or

replacing the paper roll.

- If the ERROR LED is blinking, there is an error. In this case, turn off the printer for a few seconds and

then turn it back on. If the light is still blinking, call your supervisor or service person.

- If the PAPER OUT LED is on, check the paper roll in the printer. See "Installing paper roll" (1.5) in

Chapter 1 for instruction on installing the paper roll.

«
...
18
19
20
21
22
...
»

Содержание 275C - SRP Two-color Dot-matrix Printer





































































































Отзывы:

Нет отзывов

Похожие инструкции для 275C - SRP Two-color Dot-matrix Printer

Бренд: Samsung Страницы: 347

SCX 6555N - MultiXpress Mono Multifunction

Бренд: Samsung Страницы: 180

SCX-4300 - SCX 4300 B/W Laser

Бренд: Samsung Страницы: 18

SCX-4521FG - B/W Laser - All-in-One

Бренд: Samsung Страницы: 215

SCX 6320F - B/W Laser - All-in-One

Бренд: Samsung Страницы: 332

SCX 4828FN - Laser Multi-Function Printer

Бренд: Samsung Страницы: 248

SCX 4725FN - B/W Laser - All-in-One

Бренд: Samsung Страницы: 253

ML 2851ND - B/W Laser Printer

Бренд: Samsung Страницы: 179

ML 2510 - B/W Laser Printer

Бренд: Samsung Страницы: 84

ML 1740 - B/W Laser Printer

Бренд: Samsung Страницы: 152

ML 1630 - B/W Laser Printer

Бренд: Samsung Страницы: 142

ML 1630 - B/W Laser Printer

Бренд: Samsung Страницы: 82

Бренд: Samsung Страницы: 2

Бренд: Samsung Страницы: 384

Lazett Combo SCX-4216F

Бренд: Samsung Страницы: 135

Бренд: Samsung Страницы: 414

SCX 6555N - MultiXpress Mono Multifunction

Бренд: Samsung Страницы: 112

scx-4100 series

Бренд: Samsung Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды