11
ã
Bittner-Audio
BITTNER Installation & Operations Manual
Username: sxl
Password: 11111
Please refer for more detailed information to the SXL Manual.
2. DSP Control over RS-485:
(See also chapter ‘RS-485 Ports’.) The DSP can be controlled also via the RS-485 port on the rear panel of
the amplifier. For this control mode the appropriate software must be installed on a computer. The computer
must be connected to the RS-485 port. The RS-485 interface was chosen to be able to control the unit
remotely over longer distances. If the unit should be controlled locally, any standard Interface from USB or
RS-232 to RS-485 can be used to get the computer connected to the RS-485 port of the amplifier.
As soon as the amplifier is connected to the control computer, the unit can be manually connected (menu
‘Devices’) or scanned automatically.
screen shot of the DSP control with PC software, over the RS-485 interface
After connecting to the amplifier’s DSP, the shown sub windows can be opened and positioned freely on the
main window. With the preset functionality the current settings can be stored. Up to 100 DSP presets can be
stored and recalled.
Note: Presets can't be stored / recalled while amplifier is in Standby mode.
The DSP control software for PC (Windows
TM
) is available from BITTNER Audio.
