_______________________________________________________________________
_BITTEL
Page 8 of 13 HWDCD9888(38)TSD
10.
Caller ID and dial back
Setting Caller ID display time disappear ( the time can set through the menu )after a
definite time . Keep secret numbers and mailbox with indictor.
CID for incoming calls up to 16 digits and total 50 groups .
CID for out-going calls up to 24 digits and total 10 groups.
Pre-dial number up to 24 digits;
Redial number up to 32 digits;
Local area code up to 5 digits.
11. Message Waiting Light
It is ringing and new message indicator.
On-hook mode press this key will off-hook and dial the number directly which has been
stored . Press it again will realize on-hook mode.
( Only under on-hook mode, the above can works well ).
12. Adjust Ringer Volume
Setting the ringer switch which locates on the front of the device to adjust the ringer
volume to Hi/ Lo for base.
Press VOL+/VOL- key lasting to adjust the volume for handset.
13.
Busy Tone Disconnect Automatically
If the base not in on-hook mode after making a call , this product can keep it into on-hook
mode within a definite time after receive busy tone, keep the new call coming freely.
14.Setting Menu
Press [SET] key into menu setting mode, press [SET] key again to confirm after finish the
setting . Exit automatically if on-hook or off-hook. Press UP/DOWN key to view setting
items which will exit with on-hook or off-hook. Press VOL key can escape the setting
mode too. Following setting under on-hook:
a. Setting date and time:
Press [UP] or [ DOWN] key enter into “SET TIME “ item , then press [SET] key and
use keypad to adjust the Hour/ Minute/ Day/ Month, after finished, press [SET] key and
LCD display “OK”. Press [SET] key again to confirm.
b. Caller ID time setting:
LCD display “ CALL DISPLAY”, then press [SET] key enter into, press UP/DOWN to
choose , then press [SET]and LCD display “OK”. Press [SET] key again to confirm.
( Three choice: 10S,30S , ALWAYS(not disappear ).
c. Delete handset(s) register:
Press UP/DOWN key to “ DEREGISTER”, then press [SET] key and input the number
of the handset, at last press SET key to confirm.
d. Setting FLASH time:
On-hook mode, press [SET] key , then press FLASH key to set flash time .Press digits
(1—9,0,*,#) Then press [SET] key to confirm , factory default: 600ms.
